Enquire
Like us!
Follow us!
Review us!
Follow us!
Follow us!
Subscribe

DEPARTMENT of Mechanical ENGINEERING

skill and career development

We are keen to shape our young minds through development of Technical Skills and Life Skills focusing their professional development. To achieve this, we have created a center for Skill and Career Development (SCD), which offers insightful Skills Development Programmes to groom students and make them corporate ready. The department achieves the enhancement of employability objectives by conducting intensive process oriented classroom training & by organizing Club of Excellence events related to both Soft and Hard Skills. These classes and events are managed by a well-groomed team from Academics. Students' get an opportunity to attend a wide range of interactive workshops, training sessions that help them to recognize, develop and articulate their employ-ability skills for their future success.

It’s all about you

SKILL DEVELOPMENT

career DEVELOPMENT

entrepreneurship DEVELOPMENT


student achievements

academic achievements



  • Udhayakumar A, Gokulkrishnan R, Gokulkrishnan S, Churchiljoseph J, and Vishnu V got II prize and received cash award Rs. 15,000 in the event of JAHAAZ (Technozion) organized by NIT, Warangal from 01.11.2019 to 03.11.2019.
  • Udhayakumar A, Gokulkrishnan R, Gokulkrishnan S, and Deepkumar got I, II and III prize and received cash award Rs. 7,500 in the event of Synergy 2020 RC Boat Race organized by NIT, Tiruchy from 14.02.2020 to 16.02.2020.
  • Rajaganapathi S, Ram harish M. R, and Balaji S got I prize and received cash award Rs. 2,500 in the event of Synergy 2020 Bridge the Gap organized by NIT, Tiruchy from 14.02.2020 to 16.02.2020.
  • Mohanram Avinash.D and Sriyesh C got I prize in the event of Memathon organized by M. Kumarasamy College of Engineering, Karur on 06.03.2020
  • S. Rajaganapathi got I prize in paper presentation for the topic of Solar Water Heater organized by M. Kumarasamy College of Engineering, Karur on 06.03.2020
  • Saravanan R, Dinesh Kumar K and Rakesh S got III prize in paper presentation for the topic of Screw Jack Mechanism organized by M. Kumarasamy College of Engineering, Karur on 06.03.2020
  • Saran Raj A got selected to represent Tamilnadu Cricket team at National Level in the event of INDIA Senior Nine A Side Cricket National Championship at New Delhi from 26.01.2020 to 29.01.2020.
  • M. Hamnath secure I prize in the event of Javelin Throw organized by Bannari Amman Institute of Technology on 21.02.2020.
  • Sri Gowri Sankar B, Hari Hara Subramanian S, Gokul M and Hari Hara Subramanian S secured I prize with Cash award of Rs. 1500 in the event of RC Boat at Kamaraj College of Engineering And Technology,Virudhunagar on11.09.2018
  • Sri Gowri Sankar B, Balaji R, Murugan P, Francis Daniel .G, and Lakshmi Narayanan.N secured II Prize with cash award of Rs. 1000 in the event of Mr.Mechanic at Kumaraguru College of Technology,Coimbatore , on 01.09.2018
  • Harihara Subramanian S got III prize with cash award of Rs. 10,000 for the event RC Boat at NIT,Warangal from 26.09.2018 to 01.10.2018.
  • Cruz Antony Wisdom C, Balaji R, Gokul M, Sri Gowri Shankar B, Gokul Kumar M R and R.M.Elvin William placed 7th in the Overall Ranking Out Of 25th in the event of National Go-kart Championship at Kings College of Engineering from 09.01.2019 to 11. 01.2019.
  • R.V.Mohan Kumar of third year has published a research paper Thorium Energy and LFTR in International Journal of Scientific and Engineering Research (IJSER)ISSN 2229-5518
  • R.V.Mohan Kumar of third year has gone through peer review of research paper Bio Enrich Fuel by Micro Algae in Elsevier Sponsored journal. R.V Mohankumar of third year won 2nd place in Poster presentation on the title of The mutual blend: BIONICS at IIT Madras on 12.06.2017.
  • M.Praveen Kumar of final year won 2nd place in RC BOAT competition at Amirta University on 30.07.2017.
  • R.V Mohankumar of third year won 2nd place in paper presentation on the title of Micro Algaeat Sri Krishna College of Engineering and Technology on 08.08.2017
  • S.Jayaram of final year won 1st place in Mr.MECHANIC and CNC Programming at Maharaja Engineering College, Coimbatore on 30.08.2017
  • R.Prakash and M.P.Monish of final year won 1st place and a cash prize of Rs.1050 in Mr.MECHINIST and CNC Programming at Sengunthar Engineering College, on 31.8.2017.
  • E.Gugan, M.P.Deepan suriyaa ,S.Jackson,N.Gowtham and S.S Dineshbabu of final year won 1st place in Rc Boat and received cash prize Rs 3000 at Bannari Amman Institute of Technology on 07.9.2017.
  • Ashwin Sathya, M.Aathresh, P.Ajith, M.A Mohammed Shanfar, V.Hari balaji and P.K Bharath of Third year won second place, Best Marketing and Best Design in Mini Bike hunt and received cash prize worth Rs 5000 at Sri Krishna College of Engineering and Technology on 15.9.2017.
  • O.S Sri Ram and N.Thiru Viknesh of final year won Best Rider Award in 60 CC and 80 CC Categories at Sri Krishna College of Engineering and Technology on 15.9.2017.
  • R.V Mohankumar of third year won 3rd place in paper presentation on the title of The mutual blend: BIONICSat PPG college of Engineering and Technology on 19.09.2017.
  • E.Gugan, N.Gowtham, S.S.Dineshbabu, and Deepansuriyaa. M.P secured Appreciation award at IIT Madras on January 2017
  • Dinesh babu.s.s and his team secured Best impressive performance award at IIT Kharagpur on September 2016
  • Hariram.V secured Best Manager Award at Mepco Schlenk Engineering College, February 2017
  • Sri Ram O.S and his team secured 20,000 Cash Award at Vellamal engineering college Chennai, February 2017
  • Mohammed Shanfer.M.A and his team secured 30,000 Cash Award at Tamilnadu Engineering College on March 2017
  • Mr L.Zeeshan Ali secured Best Rider Award at Easa College Of Engineering, October 2016
  • Mr.S.Saravanakumar,Mr.G.santhosh kumar from IV year has secured I prize in project presentation held at NIT trichy on 27-2-2016
  • Mr.R.ganeshkumar,Mr.D.Aravinthan from III year has secured third prize in project presentation held at Government college of technology from 11-04-2016 to 12-04-16
  • Mr.R.Ramachandiran,Mr.G.Santhoshkumar from IV year has secured third prize in project presentation held at Dr.Mahalingam college of engineering and Technologyon 12-03-2016
  • Mr.S.Sathishkumar from IV year has secured third prize in project presentation held at Coimbatore institute of technology on 11-09-2015
  • Mr.M.Prasanthkumar from IV year has secured third prize in project presentation held at SNS college of technology on 30-09-2015
  • O.S Sri Ram and N.Thiru Viknesh of final year won Best Rider Award in 60 CC and 80 CC Categories at Sri Krishna College of Engineering and Technology on 15.9.2017.
  • E.Gugan, M.P.Deepan suriyaa ,S.Jackson,N.Gowtham and S.S Dineshbabu of final year won 1 st place in Rc Boat and received cash prize Rs 3000 at Bannari Amman Institute of Technology on 07.9.2017.
  • M.Praveen Kumar of final year won 2 nd place in “RC BOAT” competition at Amirta University on 30.07.2017.
  • MR.Vishnu.B from III year has secured III prize in cad modeling held at Government college of technology,Coimbatore on 07-04-2015
  • Mr.B.Karthick,Mr.Pradheepkumar,Mr.Manojkumar,Mr.Tamilselvan,Mr.Gopalakrishnan,Mr.Nishanth from III year has secured II prize in mini bike design 80cc held at Government college of technology,coimbatore on 07-04-2016
  • Mr.G.Arunkumar,Mr.M.Dinesh,Mr.R.Arunjyothi,Mr.K.Balamurugan,Mr.R.Mani from III year has secured I prize and best innovation in mini bike design80cc held at Government college of technology,Coimbatore on 07-04-16
  • Mr.R.Raghunandhan,Mr.M.Maheswaran,Mr.Naveen.A,Mr.D.Pravinkumar,Mr.R.Premkumar,Mr.K.S Looguvijayraj from III year has secured I prize in mini bike design 6occ held at Government college of technlogy,Coimbatore on 07-04-2106
  • Mr.L.Zeeshan Ali & team from III tear has secured Best Innovation Award in Miracle Designer held at Paavai engineering college on 30-03-2016
  • E.Gugan, N.Gowtham, S.S.Dineshbabu, and Deepansuriyaa. M.P secured Appreciation award at IIT Madras on January 2017
  • Dinesh babu.s.s and his team secured Best impressive performance award at IIT Kharagpur on September 2016
  • Hariram.V secured Best Manager Award at Mepco Schlenk Engineering College, February 2017
  • Sri Ram O.S and his team secured 20,000 Cash Award at Vellamal engineering college Chennai, February 2017
  • Mohammed Shanfer.M.A and his team secured 30,000 Cash Award at Tamilnadu Engineering College on March 2017
  • Mr L.Zeeshan Ali secured Best Rider Award at Easa College Of Engineering, Oct Gopalakrishnan, M. Mainthan, Tamilselvam N, Manojkumar M, Karthick B and Pradeepkumar T secured Best innovation Award in Mini Bike Design and Fabrication Contest at JCT College of Engineering and Technology on 23-09-2015
  • G. Santhoshkumar secured Best Presentation Award in Paper presentation at IAETSD on 12-07-2015.
  • S.Raghunandhan secured Best Rider Award Rs1000 in Mini bike race event at Paavai Engineering College on 30-3-2016.
  • L.Zeeshan Ali secured Best Innovation Award Rs1000 in Mini bike race event at Paavai Engineering College on 30-3-2016.
  • S.Raghunandhan secured Best Rider Award in Mini Bike Race at Karpagam University on 12-09-2015.
  • Ganesh Kumar .R, Arunjothi. R, Agnes. R, and Balamurugan K secured First Prize and Cash Award of Rs 8000 in Amphibot robot at Indian Institute Of Space Science And Technology on 21-03-2016.
  • Arunkumar.G, Mani R, Aravind M, Diwakar K, Dhayalan C and Naveen A secured Second Prize with Cash Award of Rs 5000 in Amphibot robot at Indian Institute Of Space Science And Technology on21-03-2016.
  • S. Ragunanthan , Naveen A, Maheswaran M, Mohammed Fayis, Prem kumar R and K.S. Looguvijayraj secured First Prize with Cash Award of Rs 10000 in Mini bike race event at Karpagam university on 23- 03-2016
  • G.Arunkumar, Naveen A, Diwakar K, and Dinesh M secured First Prize with Cash Award of Rs 5000 in Robo Racing at Sri Krishna college of Engineering and Technology on 31-03-2016.
  • R.Raghunandhan, Maheswaran M, Naveen A, Pravinkumar D, and Premkumar R secured First Prize with Cash Award of Rs 10000 in Mini bike design 60cc at Government college of Technology on 07-04-2016
  • G.Arunkumar, Dinesh M, Arunjyothi, Balamurugan K and Mani R secured Best Innovation and got Cash prize of 10000 in Mini bike design 80cc at Government college of Technology, Coimbatore on 07-04-2016
  • A.Kalees, Prabakaran, Infant Thomas Pramilton V, and Gopinath A secured Second Prize with cash award of Rs 7000 in Mini bike race event at Karpagam university on 23- 03-2016
  • S.Raghunandhan and his team secured Second Prize with cash award of Rs 7500 in Mini bike race event at Paavai Engineering College on 30-03-2016.
  • A.Gopinath and his team secured Second Prize with cash award of Rs 5000 in Mini bike design 60cc at Government college of Technology, Coimbatore on 07-04-2016
  • K.Bala Murugan and Arun jyothi R secured Second Prize with cash award of Rs 3000 in Robo Racing at Sri Krishna college of Engineering and Technology, 31-03-2016
  • B.Karthick and his team secured Second Prize with cash award of Rs 5000 in Mini bike design 80cc at Government college of Technology, Coimbatore on 07-04-2016ober 2016


  • Lexman Raj J, Sivakumar P, Lawrence Justin A, Muthu Kumarn V, Mohammed Shakil M, Maheshwaran A & Kalaiselvan S “Waste Water Treatement Using Air Stripper and Natural adsorbent”, International Journal of Research and Analytical Reviews, vol.6, no. 1, 2019.
  • Sabareesh A, Pradeep S, Mohammed Shanfar M.A & Mohammed Shahin S “Fabrication of ABS Filaments and its Printable Performance”, International Journal of Modern Trends in Engineering and Science, vol.6, no. 1, 2019.
  • Mohan Kumar R.V, Sivakumar P Govindaraj R, 2017,Thorium Energy and LTFR, International Journal of Scientific and Engineering Research., vol. 8, no. 7, pp. 306-316.
  • Narayanan S, Muthukumar K Nagaraj N, 2018,Emisssion Control in CI Engines using Biodiesel blend and Catalytic Converter, International Journal of Innovative Research and Technilogy, vol 5, no. 2, pp. 554-560.
  • Sivakumar P, Mahendran S, Manikandan V, Kalaichevan A Muralidharan G, 2018,Experimental Investigation of Updraft Gasifier using solid waste as Feedstock,International Journal of Research and Scientifiec Innovation, vol. 4, no. 6, pp. 05-10.
  • Sivakumar P, Monish M.P, Jayaram S Sivakumar P, 2018, Waste Oil Powered Burner, International Journal of Advance Research, Ideas and Innovations in Technology, vol. 4, no. 2.
  • Gokulnath G, Govindaraj R, Eazhil K.M Senthilkumar L, 2018,Enhancement of Turbulent Heat Transfer Using Copper Twisted Tape, Bonfring International Journal of Industrial Engineering and Management Science, vol. 8, no. 1, pp 1-5.
  • Gokulnath G, Govindaraj R, Eazhil K.M Mahendran S, 2018,Testing an FSW Welded Joint of AA2024 and AA6082 Aluminium Plate using Ultrasonic and Penetrant Testing Method, Bonfring International Journal of Industrial Engineering and Management Science, Vol. 8, no. 1, pp 9-11.
  • Navin Prasad A.T, Sanjay Thilak K, Sridhar C, Vijay K.B Yuvaraj S, 2018,The Study of Desalination of Water using Solar Still An Overview, EPRA International Journal of Research and Development, vol. 4, no. 6, pp. 05-10.
  • Senthil Kumar L, S. Arun Pandian P, Dhanush R, Hari PrakashR Jaya Prakash, 2018, Experimental Investigation on Hybrid Bio-Polyurethane Foam Composites, International Journal of Research, Engineering, Science and Management, vol. 1, no. 4.
  • Susila B, Balaji V, Dheenadhayalan R, Velan K Jaswanth K.A, 2018,Design and Fabrication of Groundnut seperating Machine,Bonfring International Journal of Industrial Engineering and Management Science, vol. 8, no. 2, pp 10-11.
  • Eazhil K.M, Surya S, Jayakumar M, Ganeshkumar P Gokulnath G,Investigation of chromium manganese stainless steel using Taguchi method to analyze the mechanical properties, International Journal of Research and Scientific Innovation, vol. 5, no. 3, pp. 44-48.
  • Surya S, Eazhil K.M, Rishikesh S, Satheesh Raj R Venkatesh R, 2018,Comparative study on slurry erosion behavior on SS304 and SS202 in a slurry erosive test pot rig under different operating parameters, International Journal of Research and Scientific Innovation, vol. 5, no. 3, pp. 104-109.
  • Eazhil K.M, Saravana Priyan G, Sathish S, Sugarn Rajapandi N Sundara Rajan SAnalysis of Mechanical Properties of Natural and Synthetic Fibre Reinforced Polymer Matrix Composites,EPRAInternational Journal of Research and Development, vol. 4, no. 7, 2018.
  • Narashimaraj V, Aravinth C, Ashok Kumar R Balamurugan K, 2018,Investigate the Wrinking of A16061 Sheet Metal forming process by neural network, International Journal of Mechanical Engineering, Special issue.
  • Ramesh K, Gopalakrishnan P Nagaraj N, 2018 ,Radius Turner attachment for Metal Lathe, International Journal of Innovative Research and Technilogy., vol 4, no. 11.
  • Franklin Manoah S.K, Abdul Kadar J, Hemanth V, Aravind Raj P Muthukumaran M, 2018,Bevel Geared Mechanism for Portable 3600 Pedestal Air Coolrer,Bonfring International Journal of Industrial Engineering and Management Science, vol. 8, no. 2.
  • Chandrasekar K, Melvin Richardson R, Nethaji G, Nirmalkumar A Praveen B, 2018,Automatic Chapathi Making Machine, International Journal of Research and Scientific Innovation, vol. 5, no. 4, pp. 180-181.
  • Rahul. M, Murali R, Ranjithkumar P, Yeswanth L, Thiyagu C, 2018,Analysis and Fabrication of Catalytic Converter Using Nano particles for Emission Control, International Journal for Research in Science Engineering and Technology, vol. 5, no. 7.
  • Ramesh K, Dinesh Kumar P , Franklin Raja C , Jose Nirmal Vasanth R Muni Raji P, 2018,Pipe and Ring Fitting by Screw Mechanism, International Journal of Research and Scientific Innovation, vol. 5, no. 4, pp. 182-185.
  • Santhana Krishnan N, Mohanraj S, Mohana Deepak S , Vinoth Kumar S Prabu S, 2018,RF Based Automatic Speed Limiter for Vehicles, International Journal of Research and Scientific Innovation, vol. 5, no. 4, pp. 189-192.
  • Sathishkumar M, Manikandan E, Prabhakaran V Prabhakaran, 2018,Investigation in Deterioration of Automobile Parts due to Atmospheric Corrosion, International Journal of Research and Scientific Innovation, vol. 5, no. 4, pp. 260-262.
  • Dinesh L, Elankathir B, Ajith kumar A M.Muthukumaran, 2018,Automated Mechanism for Retrieval of Spectrocoin Sample from Copper Die,Bonfring International Journal of Industrial Engineering and Management Science, vol. 8, no. 2, pp 01-02.
  • Sylvester Selvanathan P, Sudhakaran R, Venkatesh K Samuvel Tites C, 2017,CFD analysis of IC engine exhaust manifold with respect to the performance of a turbocharger, Adv. Nat. Appl. Sci., vol. 11, no. 4, pp. 242249.
  • Maharajan B Balasubramanian S, 2016,Design Tapping Fixtures for Aluminium Die Casting Body in Petrol Pump, Int. J. Innov. Res. Comput. Sci. Technol., no. 6, pp. 167174.
  • Javid alaf Abdulla C.P, Balasubramanian S Kumar R, 2016, Effect of Nickel Addition in Al-Si-Ni(2-2.6%)-Cu Piston Alloy And Analysis of its Characteristics, International Journal of Advance Research and Innovative Ideas in Education, vol. 2, no.3.
  • Pradeep Kumar T, Raj Kumar S, Tharnish T Bala Murugan P, 2016,A study of thermal hydraulic performance of louver fin at various, Int. J. Res. Dev. Technol., no. 4, pp. 8693.
  • Eazhil K.M Kalees Prabhakaran A, 2016, Investigate on Mechanical Properties of Cr-Mn Stainless Steel Welded by GTAW Process, IJRME International Journal of Research in Mechanical Engineering, vol.3, no 4.
  • Renjith kumar K, Sivananda devi C . Kumar R, 2016, A Perspective Approach for Effective Scheduling in Reconfigurable Manufacturing System with Java Based Model, International Journal of Advance Research and Innovative Ideas in Education , no. 3, pp. 35803586.
  • Naveen prasanth C, Prabhuram V, Ragul S .Saravanakumar R, 2016,Power Generation from natural waste using IC Engine, IJRDT, no. 4, pp. 272277.
  • Karthigai bala M, Muthuraman M, Poornachandran S, Deepan K N.Sri Kausigaraman, 2016,Design and Fabrication of ploughing machine, IJRDT, vol. 7,no. 4, pp. 141-146.
  • Mohammed Fayis E.M, Naveen A, Prabhakaran T Balamurali B, 2016,Elimination of Headlamp Gap and Flush Concern in LCV Vehicles, IJRDT, vol. 7, no. 4, pp. 462464.\
  • Balamurali B, Renukananthan N SankarR, 2016,Design and analysis of scraper for slag (Iron Oxides) removal in CNC gas cutting machine, IJRDT, vol. 7, no. 4, pp. 206209.
  • Karthik B, Marimuthu A, Pradap K, Premkumar P Soundhar A, 2016,Kinametic Energy Recovery System on Bicycles, IJRDT, vol.7, no. 4, pp. 155160.
  • Gopalakrishan D, Pradeep A, Suhail S, Tamil Selva N Soundhar A, 2016,Prediction of Process Parameters in FSP on Aluminium Alloys-6082, IJRDT, vol.7, no. 4, pp. 161168.
  • Dhilipkumar T Santhoshkumar.K,Improving the Concentricity of the Machining Component, IJRDT, vol. 7, no. 4, pp. 152154.
  • Sejzu.M ,Govindaraj.R,2015 Semi Automatic Tool Changer for Small and Medium Scale Industries ,International Journal of Applied Engineering Research, ISSN 0973456 vol.10 no.71.
  • Santhoshkumar.G,2015Reheater Failure Analysis Using ANSYS, Journal Of Engineering and Technology, (JET), vol .5, no. 1.
  • Sejzu.M, Govindaraj.R, 2015,Automatic Vertical Storing Device for Domestic and Industrial Usage, International Journal of Advances in Engineering Research, (IJAER), eISSN: 2231 5152/ pISSN: 24541796, vol .10, no. 6.
  • Santhoshkumar.G , Ramanichandran.R,2015, Evaporative AirCooler Using Sponge Pads, International Journal for Research in Applied Science and Engineering Technology, vol .3, no. 1.


  • G.Dinesh and his team participated in Mega Project Expo at Sri Eshwar College of engineering on 26.07.2019
  • A.Udhayakumar and S. Gokulkrishnan participated in Drone events at Saveetha College of Engineering on 05.09.2019
  • K.S.Prajwal and his team participated in Go-Kart events at Kari motors Speed way Coimbatore on 10.09.2019
  • K.Dhurairaj and his team participated in IGNITEx9 at GCT Coimbatore on 01.10.2019
  • A.NaveenkumarA, K. S. Prajwal, and S. Pooventhan participated in Festember2k19 at NIT Trichy on 03.10.2019
  • S.Thrithishwaran participated in Crysalis 2K19 at Vels Institute of Technology on 04.10.2019


  • Murugadas.M participated in Marvel 2k18 at Sri Sairam Engineering College from 08/08/18 to 09/08/18.
  • K.Dhurairaj and his team participated in Mr. Mechanic Contest at Kumaraguru College of Technology,Coimbatore on 01-09-2018
  • Balaji R and his team participated in NFS Aqua 2.0 at Vellore Institute of Technology, Chennai from 06-09-2018 to 07-09-2018
  • Balaji R and his team participated in RC Boat at Kamaraj College of Engineering and Technology, Virudhunagar on 11-09-18
  • MuthuValliappan. B participated in Mini bike at SSM College of Engineering,Dindugal on 20.09.2018
  • Harihara Subramanian S and his team participated in Technozion 2k18 at NIT, Warangal from 26-09-2018 to 01-10-2018
  • M Gokul participated in Anemoi 18 at Jayam College of Engineering and Technology, Dharmapuri from 04-10-2018 to 05-10-2018
  • A.Udhaya Kumar participated in Dhrona 2k19 at Kathir College of Engineering, Coimbatore on 02.02.19
  • A.Udhaya Kumar and Anush SR participated in Dhaanishym19 at Dhaanish Ahmed Institute of Technology,Coimbatore on 02.02.2019
  • S.Gokulakrishnan participated in Henosis at Dr.NGP Institute of Technology,Coimbatore on 02.02.2019
  • Ranjithkumar.V and his team participated in Mr.Mechanic at Dr.NGP Institute of Technology,Coimbatore on 02.02.2019
  • M ChidambaraSelvan participated in Cad Modelling at Sri Ramakrishna College of Engineering and Technology,Coimbatore on 05.02.2019
  • B Mohan and his team participated in Resilience 2k19 at Sri Ramakrishna Institute of Technology, Coimbatore on 06.02.19
  • Prajhwal.K.S and his team participated in Yugam at Kumaraguru college of Technology, Coimbatore on 08/02/19
  • Dhanasekar N and his team participated in Aqua Boat at NIT Warangal from 15-02-19 to14-02-19
  • Vignesh.V and his team participated in Infest 2k19 at Info Institute of Engineering, Coimbatore from 14/02/2019 to 15/02/2019
  • Ram Kumaar.V.S. and his team participated in Ablaze-19 (Mini Moto Cross) Race, at Tamilnadu College of Engineering, Coimbatore
  • K. Dhinesh participated in Synergy at NIT, Trichy from 15.02.2019 to 16.02.2019


  • M. Praveen Kumar, P. Parthiban and S. Nirmal secured I place in Hover Race and Boat Race at Birla Institute of Technology and Science, Pilani1 on 24-02-18
  • V. Muthukumaran secured I place in Mequest at Sri Ramakrishna College of Engineering on 28.02.18
  • S.Jayaram IV/VII secured I place in Mr. Mechanic and CNC Programming at Maharaja Engineering College on 30-08-17
  • M.Praveen Kumar secured II place in RC BOAT at Amrita University Coimbatore on 30-07-17
  • Nikin Rohith.P and his team secured II place in 80cc and 60cc Mini Bike at Kathir College of Engineering on 28.02.2018
  • Mohammed Shanfer.M.A and his team secured II place in Mini bike 60 CC at SVS College of Engineering on 24.01.2018
  • Mohammed Salman secured III place in CAD Modeling at Sri Eshwar College of Engineering on 19.01.2018


  • Mr.S.Sanjay secured II place in Mr. Mechanic at Park College of Technology on 31-08-16
  • Mr.Ajith.P secured II place in Technical Quiz at Sri Krishna College Of Engineering Technology on 31/08/2016
  • Mr.M.Praveen Kumar and his team secured II place in Hover Craft at Sastra University from 24.02.2017 to 26.02.2017
  • Mr.C.L.Alex secured II place in Metal Craft Coimbatore Institute Of Technology on 23-08-16
  • Mr.M.R.Gokulkumar and his team secured III place in Mr. Mechanic at Park College Of Technology on 31-08-16
  • Mr.T.Vignesh and Mr. A. Nalla Mohammed secured II place in Mr Mechanic at JCT College Of Engineering And Technology on 16-09-16
  • Mr.Chanjeeviraj secured V place in Hover race at IIT Madras from 29.12.2017 to 03.01.2017
  • Mr Chandru Prasanth.C secured II place in Water Rocketry at Jai Shri Ram Group Of Institution on 08-09-16
  • Mr Dheenadhayalan.R secured II place in Water Rocketry at Jai Shri Ram Group Of Institution on 08-09-16


  • E.Gugan, K. Venkatesh, P. Sylvester and Selvanathan secured I Place in Park Parachute at Info Institute of Technology, 09-09-2015
  • P.Karuppasamy secured I place in Cad Modeling at PPG Institute of Technology, 11-09-2015
  • A.S.Satishkumar secured I place in Process planning at IIT Madras, 22-08-2015
  • S.Sudharsan and his team secured I place in Mini Bike Design and Fabrication Contest at Sri Krishna College of Engineering and Technology, 25-09-15
  • Thomas Dutta and T. Vignesh secured I place in Technical Quiz at Akshaya College of Engineering, 26-09-2015
  • G.Santhosh Kumar secured I place in Smart coders at Sri Shakthi College of Engineering and Technology, 26-09-2015
  • Sejzu.M secured II place in Mech mania at Indian Institute of Technology, Madras on 05-03-2015
  • Amith Raj.P, Sanjiv Kumar M secured II place in Technical quiz at Sri Eshwar College of Engineering, Coimbatore on 23 -08-2015
  • K.Nivas secured II place in CAD Modelling at Adithya Institute of Technology on 29.8.2015
  • A.Naveen and his team secured II place in Mini Bike Design and Fabrication Contest at Akshaya College of Engineering and Technology on 26-09-2015
  • Nikilesh.V.S and his team secured III place in Amphibot robot at Indian Institute of Space Science and Technology on 21-3-2016

  • K.Sangeeth presented a paper in Technical Symposium on Solar Refrigeration at Info Institute of Engineering on 07.02.2020.
  • V.Vignesh and P.Petchiappan presented a paper in Technical Symposium on Solar Irrigation at National Institute of Technology from 28.02.2020 to 29.02.2020.
  • K.Dhurairaj presented a paper in Technical Symposium on Quadric Cycle at Coimbatore Institute of Technology on 27.02.2020
  • Syed Mustafa and K.Manopandi presented a paper in Technical Symposium on Robotic And Automation at Adithya Institute of Technology on 04.03.2020.

  • S. R. Anush and Udhayakumar A secured I position in Paper Presentation in organized by Kathir College of Engineering, Coimbatore on 02.02.2019.
  • C.S Vignesh, V. Vigneshwaran and Ganeshbabu S secured II position in Paper presentation in Technical Symposium at M.Kumarasamy College of Technology, Coimbatore on 07.02.2019
  • Harish Kumar.B presented a paper in Technical Symposium at Kongu Engineering College, Erode on 04.10.2018
  • Rubesh.K and his team presented a Paper in Technical Symposium at Dr.NGP Institute of Technology, Coimbatore on 02.02.2019
  • Ajeethkumar R presented a paper in Technical Symposium Excel College of Engineering, Tiruppur on 09.02.2019

  • Mr.V. Muthukumaran,Mr.J.Lexman Raj , III B.E.MECH, presented a paper titledAdvanced Adaptive Lighting system in Kalainarkarunanidhi Institute of Technology on 09thMarch 2018
  • Mr.V. Muthukumaran,Mr.J.Lexman Raj , III B.E.MECH, presented a paper titledAdvanced Adaptive Lighting system in Sri Ranganathar College of Engineering and Technology on 25thFeb 2018
  • Mr. S. Mohammed Salman , III B.E.MECH, presented a paper titledEnhancing Safety Measures for Hyper Loop in Hindusthan College of Engineering and Technology on 03rd Feb 2018
  • Mr.V. Muthukumaran,Mr.J.Lexman Raj , III B.E.MECH, presented a paper titledAdvanced Adaptive Lighting system in Karpagam University on 27th Feb18
  • Mr. R.V Mohankumar, III B.E.MECH, presented a paper titledMicro Algae in PPG college of Engineering and Technology on 19 th Sep2017
  • Mr. R.V Mohankumar, III B.E.MECH, presented a paper titledMicro Algae in Sri Krishna College of Engineering and Technology on 08 th Aug 2017
  • Mr.P.Harish ,III B.E.MECH, presented a paper titledAir Purifying System in Velammal College of Engineering on 23rd Aug 2017
  • Mr.A.Udhayakumar,II B.E.MECH, presented a paper titledDevelopment in Engineering in Velammal College of Engineering on 23rd Aug 2017
  • Mr. S.Nirmal, N.Nagaraj ,IV B.E.MECH, presented a paper titledAblative Materials in Ramakrishna College of Technology on 01st Sep 2017
  • Mr. C.L.Alex, G.Thanush Nandan, III B.E.MECH, presented a paper titledSensotronic braking in Bannari Amman Institute of Technology, Erode on 07th Sep 2017
  • Mr. S.Pradeep, IV B.E.MECH, presented a paper titledDisaster Management in SSM College of Engineering and Technology Dindigal, 12thSep2017
  • Mr. A.Udhaya kumar, N.Dhanasekar, II B.E.MECH, presented a paper titledAdvanced Battery and Fuel Cell Development for Electric Vehicle in Sri Krishna College of Engineering and Technology,15thSep2017
  • Mr.A .Leonel Francis, III B.E.MECH, presented a paper titledAutomated Guided Vehicle System in Sri Krishna College of Engineering and Technology,15thSep2017
  • Mr.K.Siva, S. Sudharsan,III B.E.MECH, presented a paper titledBio-degradable polymers in PPG Institute of Technology on 19thSep2017
  • Mr. R.Prasanna, M.Mohammed thameez,III B.E.MECH, presented a paper titledComposite materials in Karpagam Institute of Technology on 27thSep2017
  • Mr.S.Mohammed Salman, III B.E.MECH, presented a paper titledSmart Blind Reader in Easwar College of Engineering on 19th Jan2018
  • Mr. R.VMohan kumar III B.E.MECH, presented a paper titledThe mutual blend: Bionics in Easwar College of Engineering on 19th Jan2018
  • Mr.S.Mohammed Salmaan III B.E.MECH, presented a paper titledConditional monitoring fault Diagnosis in Karpagam College of Engineering on 02nd Feb 2018
  • Mr.S.Mohamed Salman III B.E.MECH, presented a paper titledSmart Blind Readerin Karpagam College of Engineering on 13th Feb 2018
  • Mr. S.Aravinth , Mr.S.Mohmed shakil , Mr. A.Sabreesh , Mr.M.Anilkumaran ,III B.E.MECH, presented a paper titledAdvanced Cooling Systems in Amrita college of Technology,14thFeb 2018
  • Mr. S.Mohmed shakil, Mr.V.Saidinesh,III B.E.MECH, presented a paper titledAdvanced Cooling Systems in National Institute of Technology Trichy on 14th Feb 2018
  • Mr. Mohan Kumar R.V, III B.E.MECH, presented a paper titledThorium Energy and LFTR in National Institute of Technology Trichy on 14th Feb 2018
  • Mr. V.Venkatesh,S.Surya Moorthy , A.Solomon Prince , K.Rubesh, III B.E.MECH, presented a paper titledSolar Cooling in PSG college of Technology, 22nd Feb 2018
  • Mr. M.Mohammed Shakil,Mr.J.Lexman Raj, III B.E.MECH, presented a paper titledEnhancing Safety Measures for Hyper Loop in Park College of Technology, 24th Feb 2018
  • Mr.S Vignesh, Mr.R.Senthilkarthikeya, Mr.V.S.Sri Deepan IV B.E.MECH, presented a paper titledAbrasive Cleaning in SSN College Engineering, 09th march 2018
  • Mr. A.Leonal Francis, IV B.E.MECH, presented a paper titledAbrasive Cleaning at Government college of Technology 21st March 2018

  • Mr. CL. Alex, II B.E.MECH, presented a paper titledCompressed Air Vehicle in Info Institute of Engineering on 27 th February 2017.
  • Mr. I. Naveen and Mr. S.Mahendran, III B.E.MECH, presented a paper titledThermal electric generator in Sri Ramakrishna Engineering college on 27 th February 2017.
  • Mr. V.Deepak, III B.E.MECH, presented a paper titledNon Destructive Testing in SNS college of Technology.
  • Mr. V. Hari Raam and Mr. S.Arunpandian, III B.E.MECH, presented a paper titledAnalysis Made on Coolant fluid to increase the work output of the condenser in CSR-CECRI Karaikudi on 15 th February 2017.
  • Ms. A.G. Lakshmi and Mr. S.U.Shabarish, III B.E.MECH, presented a paper titledDesign and fabrication of fixture to reduce the lead time of Roto meter shaft in Sri Ramakrishna Engineering College on 27 th February 2017.
  • Mr.S.Nirmal, III B.E.MECH, presented a paper titledDesign of Exhaust Emission Technique in CI Engine in Sastra University on 24 th February 2017.
  • Mr. S. Nirmal, III B.E.MECH, presented a paper titledDesign of Exhaust Emission Technique in CI Engine in Care Group of Institution on 15 th February 2017.
  • Mr. S. Surya and Mr. S. Sundararajan, III B.E.MECH, presented a paper titledGraphine in Kongu Engineering College on 23rd September 2016.
  • Ms. A.G. Lakshmi and Mr. S.U.Shabarish, III B.E.MECH, presented a paper titledDesign and fabrication of fixture to reduce the lead time of Roto meter shaft in Kongu Engineering College on 23rd September 2016.
  • Mr.V.Hari Raam, III B.E.MECH, presented a paper titledIncreasing work output of turbine by introducing Nano fluids in condenser in Coimbatore institute of technology on 23rd September 2016.
  • Mr. A. Nalla Mohamed and Mr. T. Vignesh, IV B.E.MECH, presented a paper titledCompressor in Bikes in KSR college of Engineering on 22nd September 2016.
  • Mr. A. Nalla Mohamed and Mr. T. Vignesh, IV B.E.MECH, presented a paper titledSemi Air Cooler in Coimbatore institute of technology on 3rd August 2016.
  • Mr. A. Nalla Mohamed and Mr. T. Vignesh, IV B.E.MECH, presented a paper titledCompressor in Bikes in JCT College of Engineering and Technology on 1st September 2016.
  • Mr. R. Dheenadhayalan and Mr. C. Chandruprasath, II B.E.MECH, presented a paper titledSolar vehicle in Jai Shriraam Group of Institutions on 8th September 2016.
  • Mr. M. Rahul and Mr. A. Yasar Ali, III B.E.MECH, presented a paper titledDyna cam Engine in Jai Shriraam Group of Institutions on 8th September 2016.
  • Mr. G. Ajith kumar, III B.E.MECH, presented a paper titledDyna cam Engine in Jai Shriraam Group of Institutions on 8th September 2016.
  • Mr. V.Hariraam and Mr. C. Aravinth, III B.E.MECH, presented a paper titled Increasing work output of turbine by introducing nano fluids in condenser in Jai Shriraam Group of Institutions on 8th September 2016.
  • Mr. S. Mohanraj, III B.E.MECH, presented a paper titledAutonomous car in Mahendra Engineering College on 2nd September 2016.
  • Mr. S. Kathirvel and Mr. R. S. Kiran kumar, III B.E.MECH, presented a paper titledTurbocharger in Mahendra Engineering College on 2nd September 2016.
  • Mr. E. Manikandan and Mr. V. Prabakaran, III B.E.MECH, presented a paper titledOcean thermal energy in Mahendra Engineering College on 2nd September 2016.
  • Mr. R. Dheenadhayalan and Mr. C. Chandruprasath, II B.E.MECH, presented a paper titledSolar Vehicle in Park College of Technology on 31stAugust 2016.
  • Mr. G. Ajith kumar and Mr.S. Gokul, II B.E.MECH, presented a paper titledDyna cam Engine in Sri Krishna College of Technology on 31stAugust 2016.
  • Ms. A.G. Lakshmi and Mr. S.U.Shabarish, III B.E.MECH, presented a paper titledDesign and fabrication of fixture to reduce the lead time of Roto meter shaft in Sri Krishna College of Technology on 31stAugust 2016.
  • Mr. J. LexmanRaj and Mr. S. Mohammed Salmaan, II B.E.MECH, presented a paper titledNanotechnology in Park College of Technology on 31stAugust 2016.
  • Mr. V. Mohan kumar, II B.E.MECH, presented a paper titledAdvancements in Geothermal power plant in Park College of Technology on 31stAugust 2016.
  • Mr.E.Manikandan, III B.E.MECH, presented a paper titledOcean thermal Energy in Coimbatore Institute of Engineering and Technology on 3rdAugust 2016.
  • Mr.S.Nirmal, III B.E.MECH, presented a paper titledOcean thermal energy in Coimbatore Institute of Engineering and Technology on 3rd August 2016.
  • Mr.C.Saravana Gobi and Mr. K. Vijay, III B.E.MECH, presented a paper titledRenewable Energy in Coimbatore Institute of Engineering and Technology on 3rdAugust 2016.
  • Mr. S. Surya and Mr. S. Sundararajan, III B.E.MECH, presented a paper titledGraphine in Coimbatore Institute of Engineering and Technology on 3rdAugust 2016.
  • Mr. B. Karthick and Mr. R. Naveenkumar, IV B.E.MECH, presented a paper titledElectromagnetic Engine in Coimbatore Institute of Engineering and Technology on 3rdAugust 2016.
  • Mr. G. Arun kumar and Mr. K. Diwakar, IV B.E.MECH, presented a paper titledAlternative fuels in Coimbatore Institute of Engineering and Technology on 3rdAugust 2016.
  • Mr. A. Nalla Mohamed and Mr. T. Vignesh, IV B.E.MECH, presented a paper titledSemi Air Cooler in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. S. Someswaran and Mr. J. Vijay Dit, II B.E.MECH, presented a paper titledOcean Energy in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. D. Aravindan and Mr. R. Ganesh kumar, IV B.E.MECH, presented a paper titledAGS in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. M. Kalandar sheik and Mr. A. Edison Francis, IV B.E.MECH, presented a paper titledRobotics in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. K .Pravin and Mr. P. Manoj kumar, IV B.E.MECH, presented a paper titledMagnifying lens using thermoelectric generator in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. S.Navaneethan and Mr. C. Praveen, IV B.E.MECH, presented a paper titledAutomatic Speed Breaker on time demand in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. S.Gokul and Mr. M.U. Shabarish, III B.E.MECH, presented a paper titledAutomatic Speed Breaker on time demand in Coimbatore institute of Engineering and technology on 3rd August 2016.
  • Mr. S.Gokul and Mr. M.U. Shabarish, III B.E.MECH, presented a paper titledRenewable Energy in KSR College of Engineering on 21ST JULY 2016

  • Mr.K. Venkatesh,Mr.Thomas Dutta ,III B.E.MECH presented a paper titledBio-Medically Identified Organizing and Tracking System in Dr. N.G.P Institute of Technology on 11thSep 2015
  • Mr.T.Vignesh ,III B.E.MECH presented a paper titled Semi Air Cooler and got First prize in Akshya College of Engineering on 26thSep15
  • Mr.G.Santhoshkumar, Mr.A. Abisek ,Mr.T. Balakrishnan,IV B.E.MECH presented a paper titled Evaporative Aircooler in KSR Institute of Technology on 24thJuly 2015
  • Mr.G.Santhoshkumar,IV B.E.MECH presented a paper titled Replacement of LDR to Control Wheel Chair using Android App in Sri Shakthi College of Engineering and Technology on 29thSep2015
  • Mr.M. Sejzu , Mr.B. Vishnu ,IV B.E.MECH presented a paper titled Automated vertical Storing in KSR Institute of Technology on 29thAug 2015
  • Mr.R. Ramanichandran,IV B.E.MECH presented a paper titled Connection of Heat to Electrical Energy in PPG Institute of Technology on 30thSep2015
  • Mr.K.S. Krishna ,Mr.P. Karuppasamy,IV B.E.MECH presented a paper titled Enhanced Heat Transfer Rate through Modified Shell and Tube heat Exchanger in SNS College of Technology on 30thSep2015
  • Mr.T.Vignesh III B.E.MECH presented a paper titled Semi Air Cooler in Christ King College of Engineering on 17thSep2015
  • Mr.P. Sylvester Selvanathan,Mr.K. Venkatesh III B.E.MECH presented a paper titledHybrid Two Wheeler in Sri Ramakrishna Institute of Technology 09thmarch2016
  • Mr.G. Santhoshkumar III B.E.MECH presented a paper titledOptimization of Ultra Sonic Welding Using Taghuchi Method in SNS College of Technology on 30th Sep 2015.
  • Mr.P. Sylvester Selvanathan,Mr.K. Venkatesh III B.E.MECH presented a paper titledStrategies to Meet with Future Emission Norms in Coimbatore Institute of Technology on 11thSep2015.
  • Mr.V.Vivek and Mr.D. Aravindhan III B.E.MECH presented a paper titled Automated Good Shifting Machine in National Institute of Technology, Trichy on 04thmarch2016.
  • Mr.M.Sejzu III B.E.MECH presented a paper titled Automated vertical Storing in Adithya Institute of Technology on 31thAug 2015.


  • Thirumalai Kannan K, Leonal Francis A, Keerthana M.B, Muniraj M and Ramabharathi M, 2019, Tribological Behavior of modified vegetable oil using pin on Disk, Proceedings of the International Conference on Recent Trends in Engineering Technology and Management, Coimbatore Institute of Engineering and Technology.
  • Thirumalai Kannan K, Kiran Kumar K, Nijo Marhen M, Nandha Kumar B and Karthik Raj P, 2019,Investigations on Emission and Engine Performance using Jojoba as Biofuel, Proceedings of the International Conference on Recent Trends in Engineering Technology and Management, Coimbatore Institute of Engineering and Technology.
  • Arun Kumar T, Balaji S, Gokul S and Hafilur Rahman A, 2019,Analysis of Performance and Emission Characteristics of Diesel Engine using Turbo Charger, Proceedings of the International Conference on Recent Advances in Engineering and Technology, Sri Krishna College of Engineering and Technology.
  • Akash Prabhu RM, Arun Prakash A, Barath Kumar A and Navin Prasad A.T,2019,All Wheel Steering for TRI Cycle, Proceedings of the interNational Conference on,Sri Subramanya College of Engineering and Technology
  • Prabhakaran T, Aravinth S, Dinesh Kumar S, Gowtham Raj S and Jeeva M,2019,Comparative Analysis of Duplex Stainless Steel with Gray Cast Iron for Automotive Disc Brake, Proceedings of the International Conference on Mechanical and Building Science,SNS College of Technology.
  • Barath Kumar P, Bharath Pk, Balaji R, Gokul M and Senthil Kumar L2019,Fabrication of Portable Air Compressor by Using Scotch Yoke Mechanism, Proceedings of the interNational Conference on Recent Innovation in Engineering , Sri Subramanya College of Engineering and Technology.


  • Sudharson N, 2018,Analysis of Mechanical Properties of Natural and synthetic Fibre Reinforced Polymer Matrix Composites, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Sivakumar P, Kalaichelvan A, Mahendran S, Muralidharan G Manikandan V, 2018,Experimental Investigation of Updraft Gasifier using solid waste as Feedstock, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Vignesh S, 2018,CFD Analysis of Double Pipe Heat Exchanger with different Inner sections, Proceedings of the International Conference on Recent Developments in Engineering, Dhaanish Ahmed Institute of Technology.
  • Senthil Kumar K, Ragulkumar G, Ramkumar T, Santhoshkumar V Umapathy U 2018,Analysis of Speed and Turning effect of a Hovercraft with and without Rudders, Proceedings of the International Conference on Computer, Electrical, Electroniocs, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Ananada Jothi M Balaji V.M, 2018,Wear Behavior of Al/TiB2 Composite by Powder Metallurgy Method, Proceedings of the International Conference on Recent Developments in Engineering, Dhaanish Ahmed Institute of Technology.
  • Navin Prasad A.T, Sanjay Thilak K, Vijay K.B, Sridhar C Yuvaraj S, 2018,A Review Paper on Desalination using Solar Still, Proceedings of the International Conference on Computer, Electrical, Electroniocs, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Chandrasekar K, Mervin Richardson R, Nethaji G, Nirmal Kumar A Praveen B, 2018,Automatic Chapathi Making Machine, Proceedings of the International Conference on Science, Engineering, Technology and Management, Kalaignar karunanidhi Institute of Technology.
  • Thiyagu C, Praveen R, Nagendran N, Rahul R D Naveen I, 2018,Static Deformation Analysis of Leaf Spring Used in Heavy Load Vehicles, Proceedings of the International Conference on Computer, Electrical, Electroniocs, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Muneeswaran M, Krishna Prakash S, Navin Jay Krishna, Manikandan V Nirmal S, 2018, Proceedings of the Design and Analysis of an Automobile Wheel Rim with Radial and Spiral Flexures, International Conference on Energy Efficient Technologies for Sustainability, St. Xaviers Catholic College of Engineering.
  • Rahul M, Murali R, Ranjith Kumar P Yeswanth L, 2018,Design and analysis of catalytic convertor using nanoparticles, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Sudarsan K,Venu Prasad S, Vinoth C Yokesh V, 2018,Quality Control Instrument, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Sudharsan V, Ramprasath R, Sathiyanarayanalingam M Soundharrajan R, 2018,Underwater Friction Stir Welding for Dissimilar Alloys, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Rithun C.S, Sivakumar P , Sriram O.S , Surendran D 2018,Experimental Investigation of certain Performance Characteristics of Neem oil Blend in CI Engine, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Ragul C, Raveendhar M, Samynathaprabhu P Suryaprabhakaran G.T, 2018,Sprinkler Irrigation Vehicle, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Rajakumar R, Yasarali A, Raaghavendar S Sathees R, 2018,Processing of Aluminium Metal Matrix (Al6063+Al2O3+Gr) using Stir Casting Route, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Sarankumar S Suryamoorthy N Vimal kumar S Vigneshkumar N, 2018,Improvement of Mechanical Properties in SS2507 using steelite as filler through TIG welding process, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Shabarish M.U, Subash S.R, Sricharan A VIGNESH S, 2018,Performance Analysis on Brake Drum by Model vibration, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Saravanagopi C, Suresh M, Venkatachalapathy K Revanth P, 2018,Fabrication of Particle Board using Natural Fibres and Testing, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Ravikumar V, Sivakumar M, Vijay K, Vishnu R, 2018,Geometric analysis of Vortex Generator in automobiles, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Tamilarasan K , Thirumoorthy M, Thiruviknesh N Thiyagarajan VR , 2018,Experimental Investigation of Mechanical Properties of Fibre Reinforced Composites Using Flax, Sisal, Bamboo and Fibres, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Lignesh R, Parthiban P, Prasanth Y, Praveenkumar M, 2018,Electric Line Fixer Drone, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Lakshmanaprasath S, Prasanna T, Krishnaraj M Manikandan M, 2018,Design of Disc Brake using 3D Modeling and Analysis of Metal Matrix Composite, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.
  • Ramesh Kumar K Rajesh Kumar M, 2018,An Experimental Investigation of Aluminium coating over the Piston in SI Engine, Proceedings of the International Conference on Computer, Electrical, Electronics, Civil and Mechanical Engineering, Ranganathan Engineering College.


  • Murali M, Murugan M, Manoj Kumar P, Mainthan M 2017,Automated Guided Vehicle Navigation by Fuzzy Cognitive maps, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Logu Vijaya Raj K, Navaneethan S, Naveen R, Nishanth P, 2017,Design, Implementation and Testing of a UAV Wooden M4 Hexacopter, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering
  • Manoj Kumar P, Manoj Kumar M, Pravin K, Kalyana Kumar M, 2017,Design and Fabrication of Modified Crop Harvester, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Karthik B, Marimuthu A, Prem Kumar P , Pradap K, 2017,Design and Fabrication of Kers Bicycle, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Gopala Krishnan D, Pradeep A, Suhail S, Tamil Selvan N ,2017,Optimization of Process Parameters in Fsp on Aluminium Alloya -0682, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Nivas K, Gowtham R, Kannan S, Sam Charles S, 2017,Motorised Gear Shifting in Two Wheelers, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Karthick B, Manikandan S, Karthik R, Naveen Kumar R, 2017,Electro Magnetic Engine by Using Solar System, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Karthikeyan S, Nagaraj P, Meiazhagan S, Kavin S ,2017,Curtain Flame Ignition Furnace (Cfif) for Sinter Plants, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Karthigai Bala M, Muthuraman M, Deepan K, Poornachandran S ,2017,Design And Fabrication of Ploughing Machine, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Manimaran L, Manivel J, Sathish Kumar P, Thiyagarajan M ,2017,Performance Analysis of Air Preheater and Economizer in Thermal Power Station, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Mohamed Fayis.E M, Naveen A, 2017,Elimination of Headlamp Gap and Flush Concern in Lcv Vehicle, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Porul Selvam S, Praveen C, Saravana Kumar S, Murasolimaran P ,2017,Design and Fabrication of Plastic Waste Shredder Machine, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Kiruban Sangeeth K, Krishna Kumar N, Pravinkumar D, Praveen V ,2017,Eco-Friendly Airconditioning, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Prem Kumar R, Kavin Kumar G, Prakash R, Navaneetha Krishnan A V ,2017,Numerial Analysis and Characterization of Nano Oxide Coated Chromium Manganese Stainless Stell by Gtaw Plates, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Nishanth.P, 2017,Mobility And Grasping Of An Object By Using Efficient Mechanism To Control Robots, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Prabhuram V, Ragul S, Mohamed Ibrahim M, Naveen Prasath C ,2017,Power Generation From Natural Waste Using Ic Engines, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Pradeep Kumar T, Raj Kumar S, Tharnish T , 2017,Study Of Thermo Hydraulic Performance of Louver Fin at Various Dimension Changes, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Yogeshwaran S, Vijay A, Sujith C, Gunaseelan P, 2017,Performance Analysis of refrigeration system by using alternate refrigerant, Proceedings of the International Conference on Scientific Research of Engineering and Technology, Ranganathan Engineering College, Coimbatore.
  • Dinesh Prasanth D, Venkatesh V, Renukanathan N, Sankar R, 2017,Design Of Automatic Slag Removal System For CNC Gas Cutting Machine, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Shankar R, Sudharsun S, Vivek V, Rakesh Kumar R ,2017,Optimization Of 304 Stainless Steel To Maximize The Tensile Strength And To Improve Corrosion Resistance On TIG Welding , Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Raj Kumar S, Suresh Kumara, Ragunath R, 2017,Design and Fabrication of Spin Dryer, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Surender M, Swarnavel S, Seemon Raj E, Vembu Kumar K, 2017,Testing Of Engine Performance Using Nano Fluids As Additives In Biodiesel, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Vetrivelayutham M, Karthick V, Logesh C, Logananth S, 2017,Investigation Of Mechanical Properties Of Friction Stir Welded In Dissimilar Metals By Butt Joint, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Sarath Kumar S, Velraj V, Santhosh K, Sanjeevi Kumar S, 2017,Identification Of Optimal Design Of Runner And Gate System Of Aluminium Die Casting Component Using CFD Model, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Santhosh Kumar K, Subash S, Vignesh T, Sathish Kumar R ,2017,Improving The Concentricity Of Machining Components, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Sasi Nath D, Vivek Karthick P, Vijaya Kannan N, Vimal Bharath T, 2017,Detection Of Re-Sharpening Frequency Of The Broaching Tool By Using LED, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Ramakrishnan S, Raja L, Pranesh C, Nalla Mohammed A ,2017,Automation in Expander Press Machine Using Conveyor and Pick and place robot, Proceedings of the International Conference on Intensive systems and Control, JCT College of Engineering and Technology.
  • Aravinth C, Ajith Kumar N, Duraisamy D, Aravind R, 2017,Effect of HHO Gas on SI Engine Performance, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • JeyaMurugan M, Arun Kumar V, BalaMurugan R, Kaliraj M, 2017,Effect of co digestion on Biogas production, Proceedings of the International Conference on Scientific Research of Engineering and Technology, Ranganathan Engineering College.
  • Saranvanan R K ,Rathina vel R , Vigneshwaran S , Ranjith Kumar D, 2017,Fabrication of Muli-nut fastenerfor automobile wheel, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Hariharan J, Asarudeen S, Aravind M, Mani R, 2017,Fabrication of Magnetic Suspension System and Comparing its effectiveness, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Infant Thomas Pramilton V, Kalees Prabhakaran A, Balaji K, Hariharan G, 2017,Investigation on Mechanical Properties of Cr Mn 200 series Stainless Steel, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Harish S G , Caleb Paul George, Arun Kumar G , Diwakar K , 2017,Aluminuim Die Casting, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Gokul R, Srihari Aravind K, Arasu M, Dharun M, 2017,Alternate fuels, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Dinesh P, Dinesh Kumar M, Boopathyraja K, Kishanthan N, 2017,Three way Hybrid trailer, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Agnes R, Arun Jyothi R, Dhayalan C, Dinesh M, 2017,Perforamce Enhancement in Ic Engine Using a Heat Pipe Heat Exchanger, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Anand raj M, Arun Kumar P, Deepka kumaran A, Eswaran P, 2017,Design and fabrication accident avoiding Hydraulic jack, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Abishek A, Aravind R, Balakrishnan T, Rajesh D, 2017,Multiple Angle Punching press, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Aravindan D, Kalandhar sheik M, Ganesh Kumar R, Elangovan V, 2017,Regeneration Clutch for Power Generation, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Jayachandran M, Jenix J, Balamurugan R, Ajitheran S, 2017,Four wheeler streering system, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Anand R, Indiraprakash R, Duraisamy D, Chinnasamy T, 2017,Digital Patch Adhesion Tester, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.
  • Dharun M, Bharath S, Ashwin ragavendran R, Dhivakaran N, 2017,Design and Thermo-Economic Analysis of Solar Pre Heating Arrangement, Proceedings of the International Conference on Furistic Innovations in Mechanical Engineering and Manufacturing Management, M.Kumarasamy College of Engineering.


  • Prithiviraj C, Sudhakar S, Sarath Kumar A, Shiran Shivaram S P, 2015,Thermal Analysis Of Diesel Engine Using Fish Oil Methyl Ester(Fome)-Diesel Blends, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Sivanesan V N, Sivaram B K, Sayooj, Ranjith Kumar R, 2015,Steam Sterilizer For Mushroom Farm, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Sivakumar V, Vel Kumar I , Vasanth Petchimuthu.M ,2015,Applying Lead Principles To Improve Productivity In A Pump Industry, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Gokul C K, Karthikeyan R, Sivasankar R, Kannan T, 2015,Ammonia Mixtures And Added Additional Fuel For Petrol Engines, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Ramesh T, Shahabudeen K, Ravi Surya A, Sasi Kumar M, 2015,Advancements In Disc Brakes, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Mohamed Sanfeer S, Saran Kumar S, Parthiban R, Rahul M, 2015,Modeling And Analysis Of Multi-Inlet River Wheel Pump By Using Renewable Energy, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Ram Kumar K, Ragunathan V, Vignesh Kumar M, Saleem R, 2015,Emission Control In Diesel Engines, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Rupesh Kiran U, Subramanian G, Sanjay R, Vijay Kumar R, 2015,Improving Valve Characteristics By Eleminating Leakage In Safety Valves And Control Valves, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Ragunandan R, Ramanichandaran R, Mahesh Kannan S, Praveen T S, 2015,Enhancement Of Lubricantion In Alco Locomotives To Overcome The Failure In Auxilary Gear Train, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Sezju M, Vishnu B, Sathish Kumar S, Vibin Chakravarthi M, 2015,Automated Vertical Storing Device For Domestic And Industrial Usage, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Sarvana Kumar S, Ramesh Aravindh M, Sathiyamoorthy P Vimalraj M, 2015,Enhancing The Biogas Production From Poultry Waste Using Prosopis Juliflora As Additive, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Vigneshwaran P, Sathyaseelan K, Vibin Varghese, Sathish Kumar K, 2015,EXPERIMENTAL INVESTIGATION OF REFRIGERATION SYSTEM, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Thamaraichelvan S A, Vinoth Pandian M, Vijay Sankar M, Saravanan P, 2015,Investigation On The Mechanical Properties Of 304 Ss Weldments Welded Using Microwave Welding, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Santhoshkumar G, Vishnu Bharath G, Prasanth M, Sridharan Nambi S, 2015,360 Air Cooler, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Sriprabhu S, Stephenraj V, Vignesh kumar V, Soundara Barani T, 2015,Performance Analysis Of Hydrogen Gas By Alkaline Electrolysis Process In The Application Of Cooking Vessels, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Rajesh Kumar P, Saravanakumar V, Saravana Vel C, Vikaspratab V, 2015,Time Reduction Of Machining Through Program, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Vimalraj V, Yokesh K, Satheesh Kumar M, Sibin Jose ,2015,Manufacturing Rotavators Shaft Using Fixtures, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Dharaniraja, Vivek S, Tamilmannan S, Subashchandrabose R, 2015,Electromagnetic Shock Absorber, Proceedings of the International Conference on Renewable Energy and Sustainable Environment, Dr.Mahalingam College of Engineering and Technology.
  • Dinesh Raj A, Gopi Krishna M, Deepak s, Arun Prakash V, 2016,Quality Improvement In Automobile Service Station Using Qfd, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Karrupusamy P, Navamanivel P, Manoj S, PrasanthKumar M, 2016,Comparision Analysis Of Modified Shell And Tube Heat Exchanger Using Nanofluids In Cfd, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Harish B, Karthik M, Manoj Kumar V, Mahendran K , 2016,Anaysis And Fabrication Of Frame And Cylinder Of 60 Ton Hydraulic Press, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Krishna K S, Karthikeyan V, Manikandan P, Hariprasath D, 2016,Heat Transfer Of Shell And Tube Heat Exchanger Using Inclined Full Baffles, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Parthiban A, Prabhu G, Naveen S, Praveen Kumar B, 2016,Design And Fabricartion Of Multi Operatinal Fixture For Textile Spare To Reduce Cost, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Gokul A, Gowtham Raj K, Naveen M, Aravind S, 2016,Design And Fabrication Of Adjustable V-Block For Header Pipe, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Selvakumar A, Benny Jebicson, Bhuvanesh R R, 2016,Discharging Roller Conveyor Synchronizing With Sprocket Mechanism, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Meenakshi Sundaram, Aravinth K, Praveen K, Basil Suresh, 2016,Design And Fabrication Of Current Transformer Accuracy Testing Fixture, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Ajith Kumar D, Sanjay L, Dinesh Kumar R, Dhanush Babu B, 2016,Study Of Defects In H-Series Cylinder Blocks To Enhance Quality, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Arul Gladsatan A, Mayil Vahanan P, Prasanth V, Praveen C, 2016,Testing Of Fsw Weld Joints Of Aa2024 And Aa6061 Aluminium Plate Using Ut Pt Method, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Mohan Raj D, Deepak R, Jayabalaji K, Jeeson P J, 2016,Design And Fabrication Of Horizontal Oscillation Suspension System Using Cam And Follower Mechanism, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.
  • Asarudeen A, Deepak Kumar P, Sasikumar R, Dinesh B, 2016,Reducing Thermal Conductivity Of 2014-T6 6061 Aluminium Alloy Using Nickel Coating By Electro Deposition Method, Proceedings of the International Conference on Explorations and Innovations in Engineering Technology, Hindusthan Institute of Technology.


  • Kabilan G, Kaluvan S, Mukund M.B, Prakash M and Sathish Kumar M, 2019,Corrosion Test on Dissimilar Metal Joints SS 321 SS 347 Welded by Robotic MIG Welding Process, Proceedings of the 9th National Conference on Advances in Automotive Technology, PSG College of Technology.
  • N Srikausigaraman, Gowtham L, Aswin P, Arikrishnan M and Hari Balaji V 2019,Digital Intelligence System for Lathe, Proceedings of the National Conference on Emerging Trends in Engineering Design Manufacturing, Hindusthan Institute of Technology.
  • K Senthil Kumar,Alex George Paul, Chanthu V, Ibrahim Sheriff and Amuthan A 2019,Automated Seed Sowing and Grass Cutting Machine, Proceedings of the National Conference on Emerging Trends in Engineering Design Manufacturing, Hindusthan Institute of Technology.
  • M Aathresh, Anil Kumar V , Ashwin Sathya, Gokul S and Ruthuraraj K,2019,Decentralized Control of Multi Ayg System in Autonomous Ware Housing Application, Proceedings of the National Conference on Emerging Trends in Engineering Design Manufacturing ,Hindusthan Institute of Technology.


  • Eazhil K.M, Surya S, Jayakumar M, Ganeshkumar.P Gokulnath.G, 2018,Investigation of chromium manganese stainless steel using Taguchi method to analyse the mechanical properties, Proceedings of the 8th National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology.
  • Surya S, Eazhil K.M, Rishikesh S, Satheesh Raj R Venkatesh R, 2018,Comparative study on slurry erosion behavior on SS304 and SS202 in a slurry erosive test pot rig under different operating parameters, Proceedings of the 8th National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology.
  • Sri lakshmanan N, Ragunathan C, Rahul R, Venkatesh R Vigneshkumar D, 2018,Design and Fabrication of Electrostatic Filter on a Muffler, Proceedings of the 1st National Conference on Green Vehicle Technology, SNS College of Technology.
  • Muneeswaran M, Narayanan S Navin Prssad A.T, Prasanth S , 2018,Review on Influence of corrosion Cavitataion on various materials of Diesel Engine parts while using Biodiesel as Fuel, Proceedings of the 8th National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology.
  • Sivakumar P, Monish M.P, Jayaram S Sivakumar P, 2018,Waste Oil Powered Burner, Proceedings of the 1st National Conference on Green Vehicle Technology, SNS College of Technology.
  • S.Mahendran, M.Muhammad Thameez, R.Prasanna, D.Neelakandan, 2018,Overall Equipment Efficiency Improvement in Engine Assembly and Gearbox Assembly National Conference on Ideas and Innovations in Mechanical Engineering (NCIIME), TRP Engineering College.
  • Navin Prasad A.T Johns M P, 2018,Review on Influence of corrosion Cavitataion on various materials of Diesel Engine parts while using Biodiesel as Fuel, Proceedings of the 8th National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology.
  • Balaji T, Mithun A, Prakash R, Rathnavel S.A Sharath Venkatesh K,Reduction of wastage of oil in Gear Hobbing Machine, Proceedings of the 1st National Conference on Green Vehicle Technology(NCGVT 18), SNS College of Technology.
  • Muneeswaran M, Lakshmi A.G, Liyakath Ali, Nishanth K Naveen Kumar K, 2018,Experimental Analysis of EDM Machining Characterization of Aluminum Alloy Metal Matrix with Si, Proceedings of the Second National Level Conference on Recent Advances in Mechanical Engineering, Nandha College of Technology.
  • Saravanakumar R, Lakshmana Prasad S, Krishnara M, Manikandan M Prasanna T, 2018,Structural and Thermal Analysis of Disk Brake using CREO and ANSYS, Proceedings of the 1st National Conference on Green Vehicle Technology (NCGVT 18), SNS College of Technology.
  • Narayanan N, Muthukumar K, Nagaraj N, Naveen S Navaneethan C, 2018,Emission Control in CI Engine using Bio-Diesel Fuel Blend and Catalytic Converter, 1st National Conference on Green Vehicle Technology(NCGVT 18), SNS College of Technology, Coimbatore, 06-07 April-2018.
  • Santhana Krishnan N, Mohan Raj S, Prabhu S, Mohana Deepak S Vinoth Kumar S 2018 ,RF Based Automatic Speed Limits for Vehicles, Proceedings of the 8th National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology.
  • Srikausigaraman N, Paramaguru S, Prabhakaran S Santhosh Kumar S, 2018,Automatic Pneumatic Clutch and Braking System, Proceedings of the 1st National Conference on Green Vehicle Technology, SNS College of Technology.
  • Gopala Krishnan V, Mouleeswaran B, Kathirvel S, Pradeep Kumar S Kiran Kumar S, 2018,Analysis of Aerodynamic Drag Reduction of Passenger Vehicle, Proceedings of the 1st National Conference on Green Vehicle Technology(NCGVT 18), SNS College of Technology.
  • Srikausigaraman N, Manikandan R, Manoj J, Manoj Prabhakaran S Navee T, 2018,Slurry Erosion Testing on SS409 Coated on TiO2 Al2O3, Proceedings of the 8th National Conference on Emerging Trends in Mechanical Engineering, SNS College of Technology.
  • Balamurali B, Lignesh R, Parthipan P, Praveen Kumar M, Prasanth Y, 2018,Electric Line Fixer Drone, Proceedings of the 1st National Conference on Green Vehicle Technology(NCGVT 18), SNS College of Technology.
  • Sathish Kumar M, Prabhakaran K, Manikandan E Prabhakaran V, 2018,Deterioration of Automobile Parts due to Atmospheric Corrosion, Proceedings of the 1st National Conference on Green Vehicle Technology(NCGVT 18), SNS College of Technology.


  • Maheswaran S, Naveen Kumar P, Raghunandhan S, 2017,Multi Utility all Terrain Vehicle using 50 cc Engine, Proceedings of the National Conference on Research and Innovative Trends in Engineering, MAM College of Engineering.
  • Satish Kumar A S, Ranjith Prabhu B, Thamburaj K, Arun Kumar M, 2017,Investigation Of Engine Properties Using Biodiesel With Aqueous Dispersed Graphene Nano Particles, Proceedings of the National Conference on Recent Trends in Science Engineering, Christ The King Engineering College.
  • Sylvester Selvanathan P, Venkatesh K, Samuel Tites C, Rajamanikandan D, 2017,CFD Analysis Of IC Engine Exhaust Manifold With Respect To The Performance Of A Turbocharger, Proceedings of the National Conference on Recent Trends in Science Engineering, Christ The King Engineering College.
  • Thomas Dutta, Shrey Sanwaria J, Sridhinakaran P, Vanesh S ,2017,Prediction Of Exposure Time and Proportion of Interfacing Material Microwave Welding of Stainless Steel 304 Grade, Proceedings of the National Conference on Recent Trends in Science Engineering, Christ The King Engineering College.
  • Varun P, Selva Kumar P, Thirukumaran M, Srihari M, 2017,Design And Construction Of Mechanized Heliotrope BuildingProceedings of the National Conference on Recent Trends in Science Engineering, Christ The King Engineering College.
  • Ramkumar S, Rethish M, Sanjeev S, Sujith Beno S, 2017,Automatic Suspension Using Rocker Boogie Mechanism, Proceedings of the National Conference on Recent Trends in Science Engineering, Christ The King Engineering College.


  • Mani K, Jerry Daniel J, Boopathy S, Ashish Kumar J,2015,Mechanical Behaviour Of Aluminium Alloy(6061) By Using Stir Casting Method, Proceedings of the National Conference on Versatile Automation, SNS College of Engineering.
  • Devaraj R, Prabhakaran R, Sarath Kumar .D, Sudeesh .S, 2015,Condition Monitoring - A Tool For Sheduled Preventive Maintanance, Proceedings of the National Conference on Versatile Automation, SNS College of Engineering.
  • Giridhraprasad G, Jagadeeswaran B, Karthikeyan R, Anandraj S,2015,Re-Engineering And Internal Leakage Identification From Cylinder Engine Using Blowby Kit For Locos, Proceedings of the National Conference on Versatile Automation, SNS College of Engineering.

Extra-Curricular achievements


  • DarshinKarthick.T got II prize in the event of Silambam (Super Senior Category) organized by Youth Federation on 28.09.2019.
  • O.S Sri Ram and N.Thiru Viknesh of final year won Best Rider Award in 60 CC and 80 CC Categories at Sri Krishna College Of Engineering and Technology on 15.9.2017.
  • C.Cruz antony wisdom and T. Govardhan secured II place in Mr. Spark at Coimbatore Institute of Technology on 23-09-17
  • Lexmanraj.J and V. Muthukumar secured III place in Just in Time at Kalainarkarunanidhi Institute of Technology on 09-03-18
  • C.Cruz antony wisdom of Third year won Second place in Graphiser at Coimbatore Institute of Technology on 23.9.2017.
  • Gokulakannan.P,Aravind vignesh.S,Harishraja.R,Gowtham.G, Mervyn K Jacob of Second year got Best Team in Mini Bike and received case prize worth Rs.1000 at Hindusthan College of Engineering and Technology on 06.10.2017
  • O.S Sri Ram and N.Thiru Viknesh of final year won Best Rider Award in 60 CC and 80 CC Categories at Sri Krishna College Of Engineering and Technology on 15.9.2017.
  • M. Praveen Kumar secured III place in Hover Prix at Guindy on 03-02-18
  • Mr.Dhanush Kumar S.M secured I place in Situation Management at Sri Krishna College of Engineering Technology on 31/08/2016
  • Mr.Lakshmi.A.G secured III place in Situation Management at Sri Krishna College Of Engineering Technology on 31/08/2016
  • G.Santhoshkumar and R. Ramanichandran presented India International Science Festival, Young Scientist Conference at IIT Delhi on 06-12-2015
CO-Curricular achievements


  • L.Joyal Anatharaj and his team participated in Seminar –Students Conclave at Sri Ramakrishna Engineering college on 13.09.2019
  • M.Arun and his team participated in project presentation at Reva University, Bangalore on 04.05.2019
  • P.Navin Prasad and his team participated in Youth Summit at Indian Institute of Technology Chennai on 20.01.2020
  • Mohankumar.R.V and Johnsamuel participated in ICT Acadamy Youth Talk2018 at Sri Krishna College of Engineering and Technology,Coimbatore 27.09.2018.
  • M.mohamedShakil,K.AnathaRajiv,C.Naveenjoseph,V.Saidinesh,K.Rajesh,P.JowinAndrew,M.Mohammed shahin,A.Sabareesh and P.Nikin Rohit of Third year won first place in Mini Bike and received case prize worth Rs.10,500 at Dr.NGP Institute of Technology on 28.9.2017
  • R.V Mohankumar secured II place in Poster presentation at IIT Madras on 12-06-17
  • Ashwin Sathya,M.Aathresh,P.Ajith,M.A Mohammed Shanfar,V.Hari balaji and P.K Bharath of Third year won first place in RIDE 2K17 and received cash prize worth Rs 15000 at Karpagam College of Engineering on 22.9.2017.
  • Lexmanraj.J and V. Muthukumar secured II place in Lathe Boss at RVS technical campus on 21.03.2018
  • Mr.Mohankumar .R.V secured I place in Technical Quiz at Park College of Technology on 31-08-16
  • Mr.Dhanush Kumar S.M secured III place in Spot presentation Sri Krishna College Of Engineering Technology on 31/08/2016.
  • Mr Hariraam .A secured III place in Quiz events at Jai Shri Ram Group Of Institution on 08-09-16
  • Mr Aravinth.C secured III place in Quiz events at Jai Shri Ram Group Of Institution on 08-09-16
  • Sylvester Selvanathan.P, Vivek V, Aravindhan D secured I place in Auto Quiz at Kongu Engineering College, 09-03-2015
  • P.Sylvester selvanathan secured I place inGD Challenge at IIT Madras, 22-08-2015
  • Venkatesh.K secured I place inBest Manager at Sri Ramakrishna Engineering College, 08-03-2015
  • C.Aravinth secured II place in Main Quiz at IIT Madras on 23 -08-2015
  • M.Sejzu and B. Vishnu secured I place in Paper Presentation at KSR Institute Of Engineering And Technology, 20-08-2015
  • G.santhosh kumar secured I place in Project Presentation at Tamilnadu College of Engineering, 25-09-2015
  • G.santhosh kumar secured I place in Project Presentation at Sri Shakthi College of Engineering and Technology, 26-09-2015
  • R.Ramanichandran secured I place in Paper Presentation at PPG Institute of Technology, on 30-09-2015
  • Balaji R, Sri Gowri Sankar B & Hari Hara Subramanian S from IV year Mechanical Department has secured Second place with 5.5k voucher in the NFS AQUA 2.0 conducted and organized by VIT ,CHENNAI on 07.09.2018
  • Harieash K R from IV year Mechanical Department has secured Second place with 5.5k voucher in the NFS AQUA 2.0 conducted and organized by VIT ,CHENNAI on 07.09.2018.
  • Hamnath.M from II year Mechanical Department has secured Second place with 5.5k voucher in the NFS AQUA 2.0 conducted and organized by VIT ,CHENNAI on 07.09.2018.
  • Hari Hara Subramanian S, Sri Gowri Sankar B & Balaji R from IV year Mechanical Department has secured First place with 1500rs cash back in the RC BOAT conducted and organized by Kamaraj College of Engineering And Technology,Virudhunagar on 11.09.2018.
  • Murugan P from III year Mechanical Department has secured First place with 1500rs cash back in the RC BOAT conducted and organized by Kamaraj College of Engineering And Technology,Virudhunagar on 11.09.2018.
  • Francis Daniel .G from II year Mechanical Department has secured II Place in the RC BOAT conducted and organized by Kamaraj College of Engineering And Technology,Virudhunagar on 11.09.2018.
  • Sangeeth.K from II year Mechanical Department has secured Second Prize and cash prize Rs 1000 in the Mr.Mechanic contest conducted and organized by Kumaraguru College of Technology,Coimbatore on 01-09-2018.
  • Lakshmi Narayanan.N from II year Mechanical Department has secured Third Prize and cash prize Rs 1000 in the Mr.Mechanic contest conducted and organized by Kumaraguru College of Technology,Coimbatore on 01-09-2018.
  • Harieash.K.R from IV year Mechanical Department has secured Second Prize in the ACM Project Contest conducted and organized by SNS College of Engineering on 17.9.2018.
  • Harihara Subramanian S, Cruz Antony Wisdom C, Balaji R, Gokul M, Sri Gowri Shankar B & Gokul Kumar M R from IV year Mechanical Department has secured Third Prize and got cash award Rs 10,000 in the RC Boat conducted and organized by NIT,Warangal on 26.9.2018 to 01.10.2018.
  • R.M.Elvin William, M.Arikrishnan, A.Leonal Francis, V.Haribalaji & S.Mohammed Salmaan from IV year Mechanical Department has secured Placed 7th In The Overall Ranking Out Of 25th in the National Go-kart Championship conducted and organized by Kings College of Engineering on 09.01.2019 – 11. 01.2019.
  • P.Jowin Andrew, M.Dhakshinamoorthy, M.Mohammed Shahin, C.Naveen Joseph, V.Anilkumar, M.Aravinth, S. Aravinth & M.Karikalan, from IV year Mechanical Department has secured Placed 7th In The Overall Ranking Out Of 25th in the National Go-kart Championship conducted and organized by Kings College of Engineering on 09.01.2019 – 11. 01.2019.
  • K.S.Prajhwal, S.Karan, R.Sriram Santhosh & V.S.Ramkumaar from III year Mechanical Department has secured Placed 7th In The Overall Ranking Out Of 25th in the National Go-kart Championship conducted and organized by Kings College of Engineering on 09.01.2019 – 11. 01.2019.
  • M. Chidambara selvan from III year Mechanical Department has secured First prize in the CAD Modeling conducted and organized by Dr.NGP Institute of Technology on 02.02.2019.
  • B.Hariharan from III year Mechanical Department has secured 2nd place in the Mechanical quiz conducted and organized by Sri Ramakrishna Institute of Technology on 06.02.2019.
  • D.Guruprasath from III year Mechanical Department has secured First prize in the Mr.Azpomers conducted and organized by Sri Ramakrishna Institute of Technology on 06.02.2019.
  • S.R.Anush & Udhaya Kumar.A from III year Mechanical Department has secured First prize in the Paper presentation conducted and organized by Kathir College of Engineering on 02.02.2019.
  • S.Sarath from III year Mechanical Department has secured 2nd place in the Quiz conducted and organized by Dr.NGP Institute of Technology on 02.02.2019.
  • S.Jayaram of final year won 1 st place in “Mr.MECHANIC” and “CNC Programming” at Maharaja Engineering College, Coimbatore on 30.08.2017
  • R.Prakash and M.P.Monish of final year won 1 st place and a cash prize of Rs.1050 in “Mr.MECHINIST” and “CNC Programming” at Sengunthar Engineering College, on 31.8.2017.
  • Alex .C.L from II year has secured I prize and cash prize of Rs 1500 in Fix Them Up held at NIT Trichy on 18/3/17.
  • Alex .C.L & Mr. Cruz Antony wisdom .C from II year has secured II prize and cash prize of Rs 1000 in CAD Modeling held at NIT Trichy on 18/3/17.
  • Alex .C.L, Mr. Cruz Antony wisdom .C & Mr. Gokul Kumar. M.R from II year has secured I prize and cash prize of Rs 900 in Techy hunt held at NIT Trichy on 18/3/17.
  • Praveen & Mr. Naveen .I from III year has secured II prize and cash prize of Rs 12000 in Boat Race held at NIT Trichy from 01/3/17 to 4/3/17.
  • C.Aravinth, Mr. S.S .Dineshbabu , Mr. E.Gugan, N.Gowtham & Deepansuriyaa . M. P from III year has secured Special prize and cash prize of Rs 1000 in Contraption held at PSG I Tech on 17/02/2017.
  • Hariram .V & Mr. S .Arun Pandian from III year has secured II in Paper Presentation held at CSIR-CECRI Karaikudi on 15/02/2017 to 17/02/2017.
  • S.S .Dineshbabu , Mr. E.Gugan, N.Gowtham & Deepansuriyaa . M. P from III year has secured Appreciation prize in Hover pod held at IIT Madras on 31/12/2016 to 02/01/2017.
  • Chanjeeviraj from III year has secured V prize in Hover race held at IIT Madras on 29/12/2016 to 03/01/2017.
  • Dinesh babu .s .s, Mr. Gugan .E .C, Mr. Jackson.S & Mr. Deepan Suriyaa .M.P from III year has secured Best Impressive Perfomance prize in Hover pad held at IIT Kharagpur on 02.09.16 to 04.09.16.
  • Mr.Mohankumar .R.V from III year has secured I prize in Technical Quiz held at Park college of Technology on 31-08-2016
  • Mr.R.Ramanichandran from IV year has secured third prize in Technical Quiz held at Info institute of technology
  • K.Venkatesh from III year has secured first prize in Technical debate held at Coimbatore Institute of Technology in
  • Thomas dutta from IV year has secured I prize in Technical Quiz held at Akshaya college of engineering technology on 26-09-2015
  • Mr.G.Santhosh kumar from IV year has secured I prize in Smart coders in Sri sakthi college of engineering and technology on 26-09-2015
  • Mohammed shanfar.M.A, Mr. Aathresh.M, Mr. Ashwin Sathya, Mr. Hari balaji.V.M, Mr.Bharath.P.K & Mr.Ajith.P from II year has secured I prize and cash prize of Rs 10000 in Mini bike race held at Kumaraguru College of technology Coimbatore on 18/3/17.
  • Sri Ram O.S, Mr.Vimal Kumar .S, Mr.P.Sivakumar, Mr.G.Ragulkumar, Mr.C.S Rithun & Mr.D.Surendheran from III year has secured I prize and cash prize of Rs 20000 in Mini bike race held at Vellamal engineering college Chennai on 4/02/2017.
  • Mohammed shanfar.M.A, Mr. Aathresh.M, Mr. Ashwin Sathya, Mr. Hari balaji.V.M & Mr.Bharath.P.K from II year has secured I prize and cash prize of Rs 30000 in Mini Bike 60 cc held at Tamilnadu Engineering College on 3/03/2017.
  • Thiru vignesh , Mr.Vishnu.R, Mr.Vigneshkumar.D, Mr.Ramkumar.T, R .Sanjaithilak & Mr.Sivakumar.P from III year has secured I prize and cash prize of Rs 20000 in Mini Bike 60 cc held at Tamilnadu Engineering College on 3/03/2017.
  • G.Arun Kumar, Mr.T.Pradeep Kumar, Mr.B.Karthick, Mr.A.Naveen, Mr.S.Raghunandhan & Mr.N.Tamil Selvan from IV year has secured III prize and cash prize of Rs 2500 in Mini Bike 60 cc held at Tamilnadu Engineering College on 27-09-16.
  • Mohammed shanfar.M.A, Mr. Aathresh.M, Mr. Ashwin Sathya, Mr. Hari balaji.V.M & Mr.Bharath.P.K from II year has secured II prize and cash prize of Rs 10000 in Mini Bike 60 cc held at Karpagam Engineering College on 23-09-16.
  • G.Arun Kumar, Mr.T.Pradeep Kumar, Mr.B.Karthick, Mr.Tharnish.T, Mr.A.Naveen, Mr.Poornachandran.P & Mr.N.Tamil Selvan from IV year has secured III prize and cash prize of Rs 5000 in Mini Bike 60 cc held at P.A. College Of Engineering on 16-09-16.
  • P.Nishanth, Mr.T.Pradeep Kumar, Mr.B.Karthick, Mr.D.Gopalakrishnan, Mr.A.Naveen, Mr.M.Mainthan & Mr.N.Tamil Selvan from IV year has secured I prize and cash prize of Rs 10000 in Mini Bike 80 cc held at Dr.NGP Institute Of Technology on 30-09-16.
  • M.Maheshwaran, Mr.S.Ragul, Mr.B.Karthick, Mr.E.M Mohammed fayis, Mr.S.Poornachandran, Mr.T.Tharnish & Mr.R.Premkumar from IV year has secured I prize and cash prize of Rs 10000 in Mini Bike 60 cc held at Dr.NGP Institute Of Technology on 30-09-16.
  • P.Sylvester Selvanathan, Mr.K.Balamurugan, Mr.A.Gopinath, Mr.L.Zeeshan ali, Mr.V.Infant thomas pramilton, Mr.A.Kaleesh prabhakaran & Mr.C.Deepan from IV year has secured II prize and cash prize of Rs 7000 in Mini Bike 60 cc held at Dr.NGP Institute Of Technology on 30-09-16.

sports achievements



  • All India Level Yogasana Championship: V.S. Sangeetha from II year ECE has secured First Position in All India Level Yogasana Championship’17 held at Andaman on 29.04.2017


  • Mr.Praveen,Mr.I.Naveen from III tear has secured II prize in Boat racing held at NIT trichy from 01-03-2017 to 04-03-2017.
  • Mr.Chanjeeviraj from III year has secured V prize in Hover race held at IIT madras from 29-12-2016 to 03-01-2017.
  • Mr.Sriram,Mr.S.Vimal kumar,Mr.P.Sivakumar,Mr.G.Ragulkumar,Mr.C.S.Rithun,Mr.D.Surendhren from III year has secured first Prize in Mini bike race held at vellamal engineering college ,chennai on 04-02-2017
  • Mr.M.Maheswaren,Mr.S.Ragunathan,Mr.A.Naveen,Mr.E.M.Mohammed Fayjs,Mr.R.Premkumar,Mr.K.S.Loogu vijar raj from III year has secured first prize in mini bike race event held at Karpagam university on 23-03-2016
  • Mr.G.Arunkmar,Mr.P.Gokulkrishnan,Mr.B.Ashwin,Mr.A.Naveen,Mr.K.Diwaker,Mr.Dinesh.M has seured first prize in robo race helt at Sri Krishna college of Engineering and Technology.


  • M.Hamnath, III-Mech,SNSCE won 1st place in Javelin Throw held at Bannari Amman Institute of Technology on 21.02.2020.
  • the students of Mechanical Engineering, SNSCE won 2nd place in the Basket Ball Trophy organized by Park College of Engineering and Technology in the year 02.03.2020.
  • V.Vegeesh, M.Tamilarasan, A.Ramdev, M.Ruban Kumar, P.Pravin Kumar, S.Kamaleshwaran , V.JohnDravid, E,Poovendhan, T.SivaAnbuselvan and K.SivaBaskar secure III prize in the event of Volley Ball Anna University Zonal Tournaments 2018-2019 at KGISL on 29.08.2018.
  • Vigneshwaran V of IV MECH Participated in cricket match in Coimbatore Institute of Technology on 04-08-2018.
  • Siva K of IV MECH Participated in cricket match in Kumaraguru College of Technology on 10-08-2018.
  • Vishnu Ram.A of IV MECH Participated in cricket match in Kumaraguru College of Technology on 10-08-2018.
  • Muniraj M of IV MECH Participated in cricket match in Sasuri College of Engineering on 30-08-2018.
  • Siva K of IV MECH Participated in Kabaddi Match in CMS Arts and Science College on 3-09-2018.
  • Babul Kumar M G of II MECH Participated in Kabaddi Match in Cms Arts and Science College on 3-09-2018.
  • Aravinthan. B of II MECH Participated in KHO-KHO in Sri Sakthi Engineering College on 10-9-18
  • Sangeethkumar of IV MECH Participated in cricket match in Kumaraguru College of Technology on 10-08-2018.
  • Vinith Raj.R of IV MECH Participated in Athletic Meets(Au Zonal Match) in Kumaraguru College of Technology on 26-08-2018.
  • G.Gokulnath and R. Santhosh participated in Volleyball tournament at Sri Ramakrishna Engineering College on 27.07.17-29.07.17
  • R.Lignesh participated in Basket Ball Tournament at Sri Ramakrishna Engineering College on 27.07.17-29.07.17
  • P.Ranjith kumar and his team participated in Volley Ball Trophy at kumaraguru College of Technology on 11.08.17
  • A.Siva and G. Gokulnath participated in Cricket match at kumaraguru College of Technology on 11.08.17
  • S.Surya, R. Ramprasanth, P. Muniraj, and T. Naveen participated in University Hockey Match at Dr.N.G.P Institute of Technology on 05.09.17 to 06.09.17
  • M.Tamilarasan and A. Ramdev participated in University Volleyball Match at K.G.I.S.L on 30.08.17
  • Thanush nanadan G participated in Chess at Sasuri engineering college on 18-9-2017
  • Siva K and his team participated in Cricket Match at Sri Ramakrishna Engineering College on 04-01-2018
  • M.Tamilarasan and his team participated in Volley Ball at Sri Krishna College of Engineering and Technology on 19-01-2018
  • M.Sangethkumar participated in Basket Ball at Sri Krishna College of Engineering and Technology on 02.02.2018 to 04.02.2018
  • E.Gugan participated in Blaze at Government College of Technology on 02.02.2018
  • M.Sangeeth Kumar participated in Basketball at DJ ACADEMY on 20.02.2018 -24.02.2018
  • S.Zabiullakhan and his team participated in Cricket at PSG Institute of Technology on 20.02.2018-26.02.2018
  • M.Suresh, M.Sangeethakumar, T.Dhanush Vignesh, S.S.Shankar, C.Saravana Gobi and M.Suresh participated in Basket ball match at Kumaraguru College of Technology 13.08.2016
  • S.Benn Nathanael, M.Sangeethakumr,C, Saravana Gobi, Suresh M participated in Basket ball match at Karunya University 18.08.2016
  • M.Sangeethakumar, M. Suresh participated in Basket ball match at Info College of Engineering from 23-09-2016 to 24-09-2016
  • K.Balaji participated in Chess and Table Tennis at Anna University,23-08-2016.
  • G.Thanush Nandan participated in Chess Tournament at Anna University from 23-08-2016 to 24-08-2016
  • R.Vinithraj, S. Sathish Kumar and G. Vignesh participated in football match at Kumaraguru College of Technology on 13-08-2016
  • M.Arasu and R. Prem Kumar participated in Hand ball match at PPG Institute of Technology on 02-09-2016
  • A.Arun Prakash, S. Surya, T. Naveen, and K. Vembukumar participated in Hockey meet at Anna university zonal match on 01.10.2016.
  • M.Arasu participated in Table Tennis at Anna University 23.08.2016.
  • K.Rangeeshwaran participated in Zonal cricket match at Kumaraguru college of Technology from 06-09-2016 to 09-09-2016


Testimonials

arp/bog